Spring Repair is one part of our garage door repair coverage in Drew, MS. For the full picture — symptoms, costs, and when to repair vs. replace — start with the complete Garage Door Repair guide, or browse every garage door repair service we offer.
When you book spring repair in Drew, you get a tech who knows Sunflower County — Sunflower County sits in Mississippi. We serve Powell Bayou and the surrounding Drew area and nearby Ruleville, Cleveland, Mound Bayou, and Tutwiler every day.
Ask any Drew tech and they'll tell you the climate decides what fails. Hot, humid summers and short, mild winters, with frequent storms and moisture that lingers in the air most of the year brings storm-season wind that stresses panels and bottom seals, corrosion that creeps across hardware in the muggy air, and high year-round humidity that rusts springs, cables, and fasteners, year after year.
Run down the service log for Drew and the same repairs repeat: swollen, sticking wood doors in summer humidity, storm-driven debris and water in the tracks, moisture-tripped openers and sensors after storms, and mildew and rust on shaded, north-facing doors. We carry every part needed to close them out in one trip.
Garage door springs are the single most-loaded component on the entire system — a typical residential torsion spring stores enough energy to lift a 200-pound door dozens of times a day. When that spring fatigues or snaps, the door becomes unsafe to operate by hand and dangerous to operate with an opener. Our spring repair service replaces broken or worn springs, recalibrates door balance, and verifies the entire counter-weight system so the door lifts evenly and the opener does not strain.
We carry a full inventory of torsion springs, extension springs, and 30,000-cycle high-cycle springs sized for the most common residential door weights nationwide. Most homeowners are running 10,000-cycle springs from a builder install; upgrading to 30,000-cycle springs at replacement time costs only marginally more and triples expected lifespan. Every spring repair includes a full balance test, photo-eye verification, and an opener force/travel calibration.
Spring work is one of the few garage door repairs where DIY genuinely puts you at risk. The torque stored in a fully-wound torsion spring can release a winding bar at high velocity if the bar slips. Our techs are CSLB-licensed and carry liability coverage for spring work; calling a professional almost always costs less than an emergency-room visit.
A failed torsion spring makes a distinct sharp crack that homeowners often mistake for a gunshot or a transformer blowing. Inspect the spring above the door for a visible 2-inch gap between coils.
Door feels twice as heavy
If the door is hard to lift by hand or the opener strains and reverses partway up, the spring is undertensioned, worn, or broken. A balanced door should lift with one hand.
Door drops fast when released
Disconnect the opener and lift the door to chest height. If you let go and it slams down, the spring is no longer counter-weighting the panels correctly.
Opener motor whines but door barely moves
Modern openers protect themselves by reversing under load. A failing spring forces the motor into that protection mode and shortens the opener's life if not corrected.
Visible gap in the torsion spring coil
Healthy torsion springs are wound tight along their full length. Even a half-inch gap between coils indicates a snapped spring — call before attempting to use the door.
Common causes & what we fix
Cycle fatigue
Every open-and-close is one cycle. Builder-grade springs are rated for ~10,000 cycles — roughly 7–10 years of typical use. Heavy users (3+ cycles/day) see failure earlier.
Corrosion from coastal air
Homes in coastal see accelerated corrosion on uncoated springs. Salt-air pitting weakens the wire and triggers premature snaps.
Improper spring sizing
If a builder undersized the original springs for the door weight, the spring runs at higher stress per cycle and fails years early. We size replacements by measured door weight, not guess.
Missing lubrication
Torsion springs need a light coat of oil annually to prevent friction wear between coils. A dry spring fatigues 30–40% faster than a maintained one.
Door imbalance
Sagging panels or off-track travel transfer load unevenly to the springs, accelerating failure on the over-loaded side. Repair work should always include a balance check.
Our process
1
Call or schedule online. Getting spring repair scheduled in Drew takes a minute: choose a 2-hour window and we confirm the assigned tech, by name and photo, in under five.
2
On-site diagnosis. Step two is an honest spring repair diagnosis at your home — free for most repairs, $39 on minor calls (refunded if you proceed) — so you approve the fix with eyes open.
3
Flat-rate quote. Your spring repair in Drew is quoted flat-rate and in writing up front. There's no hourly creep and no pressure: our technicians are salaried, never commissioned.
4
Same-visit fix. Spring repair in Drew is typically one-and-done, backed by a 96% first-call fix rate. We test the door with you and clean up fully before we leave.
How much does spring repair cost in Drew, MS?
Spring Repair in Drew starts at $189, quoted as a flat rate in writing before any work begins — no hourly creep and no surprise add-ons. The estimate is good for 30 days, so you can compare it on your own timeline. We keep spring repair affordable across Drew, MS — one flat number quoted up front, the same one you pay at the end.
Spring Repair the United States starts at from $189, with the full spring repair price written down and locked before we start — there's no hourly meter and nothing bolted on later. We take 10% off labor for seniors (65+) and military, and jobs over $1,500 qualify for 0% APR Synchrony financing for 12 months, approved fast with no prepayment penalty.
Why homeowners in Drew, MS choose us for spring repair
Our spring repair earns repeat Drew business the hard way — durable parts for Mississippi's humid subtropical region, written 30-day quotes, and a decade-long workmanship guarantee. Family-run since 1974. We're the spring repair company Drew calls first — CSLB-licensed, insured, and based right here in Sunflower County.
We stand behind spring repair with a 10-year workmanship guarantee, kept separate from the part makers' own warranties. If the spring repair we did ever fails because of our work, we return and make it right for free across that whole decade. High-cycle 30,000 springs are lifetime-warrantied for the original homeowner; parts and accessories carry 1–5 years.
We earn trust on spring repair by quoting straight — no up-sell, salaried (not commissioned) technicians, and a diagnostic structured so you see exactly what we see. When a repair is right we recommend the repair; when replacement is the smarter long game, we say that. The flat-rate spring repair quote is written and valid for 30 days.
Areas we serve for spring repair
We provide spring repair throughout Drew, MS and the surrounding Sunflower County area. Serving Powell Bayou and surrounding neighborhoods.
Need more than spring repair? Our Drew, MS garage door company page is the local hub for every repair, install, and opener job we handle across Drew — start there for the full service lineup.
Our spring repair coverage centers on Sunflower County: Sunflower County sits in Mississippi. Drew homeowners get the same licensed, guaranteed spring repair as every community we serve here.
Our Sunflower County spring repair footprint puts Drew at the center and Ruleville, Cleveland, Mound Bayou, and Tutwiler within easy reach — one number, any day of the week. Local spring repair in Drew, MS and ZIP 38737 — same crew, same flat rate, no travel surcharge for the edges of town.
Spring Repair near you in Drew, MS
Type spring repair near me from anywhere in Drew and you should get a local crew. We serve Powell Bayou and the surrounding Drew area and the towns around it — Ruleville, Cleveland, Mound Bayou, and Tutwiler — to one standard, with no travel surcharge for being a few minutes out.
Drew is part of our greater Jackson, MS metro service area.
38737 and the surrounding blocks are all on our spring repair map. ETAs for spring repair shift with Drew traffic through the day; call and we'll quote the honest arrival window on the spot. You reach an on-call technician, not an answering machine. "Local spring repair near me" in Drew should mean a tech who already works your street — with us it does.
Frequently asked about spring repair
Top questions homeowners searching for Spring Repair near me ask us:
What's the most common garage door problem in Drew?
The call we get most in Drew is swollen, sticking wood doors in summer humidity. Drew has mostly suburban single-family homes with attached garages, alongside pockets of older in-town housing, so storm-driven debris and water in the tracks turns up often too. We carry the common parts on the truck for a single-visit fix.
Which Drew neighborhoods and ZIP codes do you serve?
Our Drew coverage spans Powell Bayou and the surrounding Drew area — including ZIPs 38737. Not sure we reach your block? Call (213) 221-2882; if you are in Drew, we will get to you.
Are 30,000-cycle springs worth the upgrade?
For most households, yes. The extra cost over a standard 10,000-cycle spring is small compared with the labor savings of avoiding two future replacements. We back 30,000-cycle springs for the life of the original homeowner.
Will my opener still work with new springs?
Yes — but it will work better. New springs change the door's counter-weight, so we re-program the opener's travel and force limits as part of the visit. This is included in the flat-rate price.
How long does spring repair take?
Most single-spring replacements take 45–60 minutes from arrival to test-cycling the door. Dual-spring or high-cycle upgrades take 60–90 minutes. We test-cycle the door with you before we leave so you can confirm the fix.
Can I just replace one spring on a dual-spring system?
We strongly recommend replacing both. Springs on a dual-spring door wear at the same rate, so the second spring is statistically days or weeks from failing. Replacing both at once costs less than two separate dispatches and re-balances the system properly.